Raven Envizio Pro, Инструкция по установке и эксплуатации

Страница: 247 / 287

Appendix I
232 Envizio Pro™ and Envizio Pro II® Installation and Operation Manual
Low RPM. Enter the lowest acceptable fan speed before the field computer will display an alert.
High RPM. Enter the highest acceptable fan speed before the field computer will display an alert.
Enable Fan Alarm. Select the fan alarm option to sound an audible alarm if the fan speed falls below the low
RPM setting or rises above the high RPM setting.
Metered Weight
Touch the Metered Weight button to start the meter roller calibration process.
To perform a catch test:
Note:
A catch test may be performed using the remote tank console. Refer to the Remote Calibration
Console section on page 238 for details on using the remote tank console with the OmniSeed
system.
1.
Be sure the master switch and all section switches are in the off position.
2.
Place the weight box below the appropriate bin to avoid dumping product on the ground.
3.
Touch the Start button on the Metered Weight screen and toggle the master switch and at least one section
switch to the on position.
4.
Continue dispensing product until a sufficient weight is in the weight box or the weight box is full.
5.
Press the Stop button and toggle the master switch to the off position.
6.
Weigh the product dispensed (minus the weight box).
7.
Touch the Metered Weight button and use the on-screen keypad to enter the weight of the product in the
units displayed on the keypad.
8.
Touch the Accept icon in the lower, right corner of the screen to save the entered weight and return to the
Calibration Settings screen.
WARNING
The metering rollers will begin turning during
the calibration procedure. Keep away from
moving components and alert anyone around
the air cart when performing the calibration
process.