Raven Envizio Pro, Инструкция по установке и эксплуатации

Страница: 70 / 287

6
P/N 016-0171-493 Rev. I 55
Basic Operation
4.
Confirm closing the open job file by touching the green check mark. To keep the current job open, touch the
red ‘x.’ Closed jobs can be re-opened later by selecting an existing job file during the Start Job procedure.
See the
Setting up a Job section on page 56 for more information.
5.
The Stop icon will be replaced with the Shutdown icon. Touch the Shutdown icon to power down the field
computer.
Job Files
Overview
The Envizio Pro stores field and product information in job files. In general, job files are created for each field
and contain the following information:
•
Target rate (min and max)
•
Coverage area and area within a field boundary
•
Volume of product applied
•
Prescription map information (if applicable)
These files are automatically created for each job started on the Envizio Pro.
Note:
To ensure field computer memory resources are available, Raven recommends performing file
maintenance periodically to remove unused job files from the memory on the console. Refer to
Chapter 8, Software Updates and File Maintenance for more information.
A job file allows the operator to:
•
Create and save new field boundary and coverage maps and other information for each application without
erasing or modifying previous jobs stored on the field computer.
•
Load previously created job files and coverage maps to resume a job at a later date. Saved field
boundaries, zone maps, guidance paths or other information stored on the field computer for the job may be
recalled to continue the application right where the operator left off.
•
Save and load job files at any time during a field application. This allows the field computer to work in
multiple fields or on different applications without losing application information for any other existing or
unfinished job file.