Raven Envizio Pro, Инструкция по установке и эксплуатации

Страница: 94 / 287

6
P/N 016-0171-493 Rev. I 79
Basic Operation
Show Overlaps
In addition to coverage, the field review mode can display application overlaps. The show overlaps feature
displays areas where active sections entered a previously applied area and allows the operator to quickly
review skips and overlaps on the same screen.
With the show overlaps feature disabled, the field review mode displays the covered areas
(including overlaps) in a solid green color. Touch this icon to toggle the show overlaps feature.
When the show overlaps feature is enabled, application overlaps are displayed in red. Overlaps
appear where application (i.e. active sections) cover previously applied areas. Note that the area
covered will not display as an overlap unless product application has overlapped.
Select Product
The field review mode displays coverage information based upon the selected product. If only one product has
been enabled, the product is always selected and the Select Product icon will not appear on the Field Review
screen.
If additional products are enabled for the current job, touch the Select Product icon to cycle through the
enabled products.
For Example:
Control channel 1 is currently selected. Touch this icon to cycle the Field Review screen to
channel 2.
Control channel 2 is currently selected. Touch this icon to cycle the Field Review screen back to
channel 1.
Toggle Maps on the Guidance Screen
During a job with an active prescription or zone map, the field computer will display either map on the
Guidance and Field Review screens. If both a prescription map and a zone map will be used, the operator may
toggle which map to display on the guidance and field review screens by selecting the toggle maps icon.
To toggle the displayed map, touch:
The view zone map icon to view the loaded zone map.
The view prescription map icon to display the loaded prescription map on all guidance displays.