Raven Envizio Pro, Инструкция по установке и эксплуатации

Страница: 185 / 287

Chapter 9
170 Envizio Pro™ and Envizio Pro II® Installation and Operation Manual
Zone Mapping Mode
Zone maps create features within a field which allow AccuBoom and the field computer to automatically shut
off or turn on product application as the machine travels through the field. The field computer may be used to
create and save AccuBoom zone maps fore each field in which automatic section control is desired.
Spray Zones. In areas where product application is desired, a spray zone allows AccuBoom to turn on boom
sections and the field computer to control application rates as normal.
No-Spray Zones. No-spray zones may be created and saved around any areas in which product application
should be avoided, such as waterways, or around well heads. AccuBoom uses the spray zone map to control
boom sections as the machine travels through the field.
For example, as the implement crosses into a no-spray zone, AccuBoom will automatically shut off any
sections that enter the no-spray zone while other sections remain enabled. As the sections re-enter unapplied
spray zones, AccuBoom will automatically toggle sections back on.
Field Boundaries. Field boundaries within an AccuBoom enabled job automatically create a zone map based
upon the completed boundary. A field boundary recorded without the AccuBoom feature enabled can be
converted to an AccuBoom field boundary later. See the
Loading a Field Boundary section on page 172 for
details.
Note:
A job file can be saved with any number of spray or no-spray zones, but a job file may only contain
a single field boundary.
Within the completed boundary, AccuBoom assigns the area as a normal spray zone. No-spray zone’s can be
recorded later to edit the area within the field boundary. AccuBoom assigns a minimum of three boom or
implement widths outside of the completed field boundary as a no-spray zone. The Envizio Pro will also disable
section control features when the vehicle is outside of the recorded field boundary.
Note:
Even though the field computer automatically controls sections when the vehicle is outside of the
field boundary, it is not recommended to approach nurse trucks or refilling stations while automatic
section control is enabled. Toggle the vehicle master switch to keep AccuBoom from turning on
sections unexpectedly.
If the ‘Enable Zone Map’ option is not selected during the Start Job - Verify Settings process,
AccuBoom will not assign spray/no-spray zones to completed field boundaries.