PerkinElmer AVIO 500, Руководство по оборудованию и обслуживанию для клиентов

Страница: 55 / 355

53
Decontamination and Cleaning
• Heat the mixture slowly and intermittently until the system is characterized.
• If you use a muffle furnace rather than a flame for heating, make a trial using
the standard amount of flux but with a smaller amount of sample.
• Most reacted fusion mixtures are dissolved in acidic solutions. Observe the
precautions described previously for handling acids.
Decontamination and Cleaning
Before using any cleaning or decontamination methods except those specified by
PerkinElmer, users should check with PerkinElmer that the proposed method will
not damage the equipment.
Decontamination
Customers wishing to return instrumentation and/or associated materials to
PerkinElmer for repair, maintenance, warranty or trade-in purposes are
advised that all returned goods must be certified as clean and free from
contamination.
The customer's responsible body is required to follow the "Equipment
Decontamination Procedure" and complete the "Certificate of Decontamination".
These documents are available on the PerkinElmer public website:
Caution
The fusion matrix will deposit on and dissolve the quartz torch over time.
It is recommended to use the unslotted (0 slots) torch because the
slotted torches will dissolve much faster.
Attention: La matrice de fusion déposera sur et dissoudre le flambeau de
quartz au cours du temps.
Il est recommandé d'utiliser la non fendue (0
fentes) torche parce que les torches fendues vont se dissoudre
beaucoup plus vite.