Mitsubishi Electric MR-J4-100B(-RJ), Инструкция по эксплуатации, Страница: 456 / 706

14. USING A LINEAR SERVO MOTOR
14 - 7
CAUTION
Before wiring, switch operation, etc., eliminate static electricity. Otherwise, it may
cause a malfunction.
Connecting a linear servo motor for different axis to the U, V, W, or CN2 may
cause a malfunction.
Do not modify the equipment.
The cables such as power wires deriving from the primary side cannot stand the
long-term bending action. Avoid the bending action by fixing the cables to the
moving part, etc. Also, use the cable that stands the long-term bending action for
the wiring to the servo amplifier.
This chapter does not describe the following items. For details of the items, refer to each section of the
detailed description field.
Item Detailed explanations
Input power supply circuit Section 3.1
Explanation of power supply system Section 3.3
Signal (device) explanations Section 3.5
Alarm occurrence timing chart Section 3.7
Interfaces Section 3.8
SSCNET III cable connection Section 3.9
Grounding Section 3.11
Switch setting and display of the servo
amplifier
Section 4.3