Mitsubishi Electric MR-J4-100B(-RJ), Инструкция по эксплуатации

Страница: 186 / 706

5. PARAMETERS
5 - 43
No. Symbol Name and function
Initial
value
[unit]
Setting
range
PD07 *DO1 Output device selection 1
You can assign any output device to the CN3-13 pin. MBR (Electromagnetic brake interlock) is
assigned as the initial value. Refer to the
"Name and
function" column.
Setting
digit
Explanation
Initial
value
_ _ x x Device selection
Refer to table 5.8 for settings. 05h
_ x _ _ For manufacturer setting 0h
x _ _ _ 0h
Table 5.8 Selectable output devices
Setting
value
Output device
_ _ 0 0 Always off
_ _ 0 2 RD (Ready)
_ _ 0 3 ALM (Malfunction)
_ _ 0 4 INP (In-position)
_ _ 0 5 MBR (Electromagnetic brake interlock)
_ _ 0 6 DB (Dynamic brake interlock)
_ _ 0 7 TLC (Limiting torque)
_ _ 0 8 WNG (Warning)
_ _ 0 9 BWNG (Battery warning)
_ _ 0 A SA (Speed reached)
_ _ 0 C ZSP (Zero speed detection)
_ _ 0 F CDPS (Variable gain selection)
_ _ 1 0 CLDS (During fully closed loop control)
_ _ 1 1 ABSV (Absolute position undetermined)
_ _ 1 7 MTTR (During tough drive)
PD08 *DO2 Output device selection 2
You can assign any output device to the CN3-9 pin. INP (In-position) is assigned as the initial
value.
The devices that can be assigned and the setting method are the same as in [Pr. PD07]. Refer to the
"Name and
function" column.
Setting
digit
Explanation
Initial
value
_ _ x x Device selection
Refer to table 5.8 in [Pr. PD07] for settings. 04h
_ x _ _ For manufacturer setting 0h
x _ _ _ 0h
PD09 *DO3 Output device selection 3
You can assign any output device to the CN3-15 pin. ALM (Malfunction) is assigned as the
initial value.
The devices that can be assigned and the setting method are the same as in [Pr. PD07]. Refer to the
"Name and
function" column.
Setting
digit
Explanation
Initial
value
_ _ x x Device selection
Refer to table 5.8 in [Pr. PD07] for settings. 03h
_ x _ _ For manufacturer setting 0h
x _ _ _ 0h