Lighthouse Raymarine gS 195, Инструкция по установке и эксплуатации

Страница: 94 / 440

6.9 Multi-Touch gestures
Raymarine a Series and gS Series multifunction
displays support multi-touch.
Multi-touch means that the display is capable of
recognizing multiple simultaneous touch inputs.
This means that you can use 2 or more fingers on
the screen at the same time to perform multi-touch
gestures.
Pinch to Zoom
The pinch to zoom gestures can be performed on
multifunction displays that support multi-touch.
Pinch to zoom consists of 2 actions:
• Move 2 fingers apart to zoom in.
• Move 2 fingers together to zoom out.
0
0
0
0
00
00
D12920-2
Pinch to Zoom can be used in the following
applications:
• Chart application.
• Weather application.
6.10 Initial set up procedures
Once your display has been installed and
commissioned, Raymarine recommends that you
perform an initial set up procedure.
Startup wizard
When you power-up the display for the first time or
after a system reset a Startup Wizard is displayed.
The wizard guides you through the following basic
configuration settings:
1. Language
2. Boat type
3. Configure Units (Units of measure)
4. Boat Details
• Minimum Safe Depth
• Number of engines
• Total fuel capacity (TFC)
• Number of fuel tanks
• Number of batteries
Note: These settings can also be set at any time
using the menus accessible from Homescreen
> Customize .
Additional settings
In addition to the settings covered by the Wizard,
it is also recommended that the following initial set
up tasks are completed:
• Set your date and time preferences.
• Adjust the display brightness (and set up a shared
brightness scheme if appropriate).
• Designate the data master.
• Select the GPS data source.
• Familiarize yourself with the product using
Simulator Mode.
Adjusting the display brightness
94
gS Series