Lighthouse Raymarine gS 195, Инструкция по установке и эксплуатации

Страница: 42 / 440

Caution: Mounting surface
requirements
This product is heavy. To prevent potential
damage to the product and / or your
vessel, observe the following BEFORE
installing the product:
• Refer to the weight information provided
in the technical specification for this
product and ensure that the intended
mounting surface is suitable for bearing
the weight.
• If the mounting surface is not suitable
for the product weight, you may need to
reinforce the mounting surface.
• If in doubt, refer to a professional
marine equipment installer for further
guidance.
Viewing angle considerations
As display contrast, color and night mode
performance are all affected by the viewing angle,
Raymarine recommends you temporarily power up
the display when planning the installation, to enable
you to best judge which location gives the optimum
viewing angle.
LCD orientation
Raymarine multifunction displays (MFDs) can be
viewed from wide angles top to bottom and left to
right.
3
4
2
1
D131 19-1
1. Top
2. Bottom
3. Left
4. Right
LCDs can be orientated in 2 directions:
1 2
D13120-1
1. 12 O’clock — Standard orientation (In the 12
O’clock orientation the LCD is better viewed from
top to bottom than it is from bottom to top.)
2. 6 O’clock — Inverted orientation (In the 6
O’clock orientation the LCD is better viewed from
bottom to top than it is from top to bottom.)
The table below details the LCD orientation for each
gS Series MFD.
MFD
LCD
orientation
MFD
LCD
orientation
gS95
(E70124) 12 O’clock gS95 INV
(E70183) 6 O’clock
gS125
(E70125) 12 O’clock gS125 INV
(E70184) 6 O’clock
gS165
(E70126) 12 O’clock gS165 INV
(E70185) 6 O’clock
gS195
(E70213) 6 O’clock
Product dimensions
A C D E
B
D12716-2
gS95 gS125 gS165 gS195
A 246.8 mm
(9.7 in) 311.8 mm
(12.3 in) 383.2 mm
(15 in) 433.9 mm
(17.1 in)
B 188.2 mm
(7.4 in) 237.1 mm
(9.3 in) 284.7 mm
(11.2 in) 391.2 mm
(15.4 in)
C 8 mm
(0.31 in) 8 mm
(0.31 in) 8 mm
(0.31 in) 8 mm
(0.31 in)
D 69 mm
(2.72 in) 70 mm
(2.75 in) 69 mm
(2.72 in) 75.9 mm
(3 in)
E 114.1 mm
(7.8 in) 114.1 mm
(7.8 in) 114.1 mm
(7.8 in) 114.1 mm
(7.8 in)
Card reader dimensions
A C D F
B
E
D12725-1
A 55 mm (2.17 in)
B 55 mm (2.17 in)
C 8.5 mm (0.33 in)
42
gS Series