Lighthouse Raymarine gS 195, Инструкция по установке и эксплуатации

Страница: 59 / 440

4.11 Thermal camera connection
You can connect a thermal camera to your gS Series
multifunction display.
The camera is usually connected via a Raymarine
network switch. If you want to use the optional
Joystick Control Unit (JCU) with the camera this
must also be connected to the network switch. A
composite video connection is required between the
camera and the multifunction display.
T200 Series thermal camera direct connection
3 4
D12840-1
2 1
5
1. T200 Series fixed mount thermal camera.
2. Multifunction display.
3. Ethernet coupler.
4. RayNet to RJ45 SeaTalk hs adaptor cable.
5. Video cable.
When connecting a T200 Series thermal camera to a
gS Series multifunction display the camera can be
supplied Power over Ethernet (PoE) by the display.
Refer to the Power over Ethernet (PoE) section for
details on PoE assignment.
T300 / T400 Series thermal camera connection.
2
3
4 5 6
D12899-1
1
8
7
S eaTalkhs / RayNet
SeaTalkhs / RayNet
SeaTalkhs / RayNet
1. Multifunction display.
2. Network switch.
3. Joystick Control Unit (JCU) (optional).
4. RJ45 SeaTalk hs to RayNet cable.
5. Ethernet coupler.
6. PoE injector (only required if using the optional
JCU).
7. Thermal camera.
8. Video cable.
Important notes
• You can control the thermal camera using your
multifunctional display. The Joystick Control Unit
(JCU) is optional, but can be used in conjunction
with the multifunctional display to control the
thermal camera if required.
• “Dual payload” thermal cameras include 2
independent lenses; 1 for thermal (infrared) and
1 for visible light. If you only have 1 display you
should only connect the video cable labelled “VIS
/ IR” (visible light / infrared) to the display. If you
have 2 or more displays you should connect 1
cable to each display.
• You can only view the thermal camera image on
the multifunction display to which the camera is
physically connected. If you want to view the
thermal camera image on more than 1 display you
must obtain a suitable third-party video distribution
unit.
• For further information regarding the camera's
installation (including connections and mounting),
refer to the installation instructions that accompany
the camera.
Thermal camera cables
Cabling requirements for thermal cameras.
Camera to network switch
A network patch cable is required to connect the
camera to the network switch. The connection is
made between the camera cable tail and the network
switch via the coupler (supplied with the camera).
Network patch cables are available in a variety of
lengths.
Joystick Control Unit (JCU)
An Ethernet (with power) cable is used to connect the
JCU. The JCU is supplied with a 1.5 m (5 ft) Ethernet
cable for this connection. If you require a different
length contact your dealer for suitable cables.
Power over Ethernet (PoE) injector to network
switch
A network patch cable is required for connecting the
PoE injector to the network switch. Network patch
cables are available in a variety of lengths.
Video cables
Video cables are not supplied with the product.
Please contact your dealer for suitable cables and
adaptors.
Raymarine recommends the use of a BNC
terminated RG59 75ohm (or better) coaxial cable.
Cables and connections 59