Lighthouse Raymarine gS 195, Инструкция по установке и эксплуатации

Страница: 263 / 440

19.8 Depth Range
The Depth Range function enables you to define
the range of depth that you see in the Fishfinder
application. In Auto Range, the Fishfinder application
automatically adjusts the range to ensure the
water column and bottom are always displayed. In
Manual Range, you can adjust the range displayed
on-screen to suit your needs.
The table below shows examples of the Range
function used with different sonar types.
Traditional and CHIRP
channels DownVision TM
channel
Auto
Range
Manual
Range
Switching between Auto and Manual range
From the application menu:
1. Select
Range .
2. Select Range: to switch between Auto and Man.
3. With manual mode selected you can now adjust
the depth range shown onscreen.
Range in and out
The method of ranging in and out of the Fishfinder
application is dependent upon the multifunction
display variant being used.
The table below shows the Range controls available
for each display variant.
Controls
Multifunction
displays
Rotary Control • c Series
• e Series
• RMK-9 keypad
Range in and
Range out buttons
• c Series
• e Series
(excluding e7
and e7D
• RMK-9 keypad
Slide the screen
Up or Down
• a Series
• e Series
• gS Series
Range shift
The Range Shift function enables a specific area of
the water column to be displayed on-screen.
In the below example the top 20 feet of the water
column is not displayed
Using range shift
The default setting adjusts the display to keep the
bottom in the lower half of the screen. Alternatively
you can shift the image within the current range.
From the application menu, with Range set to
Manual:
1. Select
Range .
2. Select Range Shift .
The range shift dialog is displayed.
3. Adjust the setting to the required value.
You will see the range changing on the screen as
you adjust the setting.
4. Select Back or press the Ok button to confirm
the setting and close the range shift dialog.
Fishfinder application
263