Lighthouse Raymarine gS 195, Инструкция по установке и эксплуатации

Страница: 312 / 440

Creating a VRM/EBL on the radar display
From the radar application:
1. Select a target or location on screen.
2. Press the
Ok button.
The radar context menu is displayed.
3. Select Place VRM/EBL .
4. Using the Joystick adjust the VRM/EBL to the
required bearing and range.
5. Press the Ok button to save the setting.
Creating a floating VRM/EBL on the radar
display
To float a VRM/EBL on a touchscreen multifunction
display follow the steps below:
From the radar application with a VRM/EBL already
created:
1. Press and hold on the VRM/EBL.
The VRM/EBL context menu is displayed.
2. Select Float Center .
3. Select the desired location for the center position.
The VRM/EBL is placed at the new location.
Creating a floating VRM/EBL on the radar
display
From the radar application with a VRM/EBL already
created:
1. Position the cursor over the VRM/EBL.
2. Press the
Ok button.
The radar context menu is displayed.
3. Use the Rotary Control to select Float Center .
4. Press the Ok button.
5. Using the Joystick , move the center position of
the circle to the desired position.
6. Press the Ok button to confirm the new position.
Unfloating a VRM/EBL on the radar
display
To re-center a VRM/EBL on a touchscreen
multifunction display follow the steps below:
From the radar application:
1. Position the cursor over the VRM/EBL.
The Radar context menu is displayed.
2. Select Center .
Unfloating a VRM/EBL on the radar
display
From the radar application:
1. Position the cursor over the VRM/EBL.
2. Press the
Ok button.
The VRM/EBL context menu is displayed.
3. Select Center .
Using the radar range rings
Radar range rings enable you to measure the
distance between two points on the radar display.
Use the range rings to gauge the approximate
distances between points. Range rings are
concentric circles displayed on the screen and
centred from your vessel at pre-set distances. The
number and spacing of the rings changes as you
range in and out.
Examples:
D 12214-1 D 12215-1 D 12216-1
Range — 1/4 nm
Range Rings —
760ft apart Range — 3/4 nm
Range Rings —
1/4 nm apart Range — 1 1/2 nm
Range Rings —
1/4 nm apart
Enabling and disabling radar range rings
From the radar application:
1. Select
MENU .
2. Select Presentation .
3. Select Range Rings .
Selecting Range rings will switch the range rings
On and Off.
312
gS Series