Lighthouse Raymarine gS 195, Инструкция по установке и эксплуатации

Страница: 210 / 440

If the Autorouting completes successfully the
calculated route is displayed.
Waypoints within the route that were calculated
using
Autorouting are assigned the Marker
waypoint symbol.
5. Subsequent route legs can be added by selecting
the next desired location on the Chart.
6. When your route is complete select Finish Build .
The Finish Route Build warning is displayed.
7. Select Exit to complete the route and close the
Build Route menu.
8. Select Follow to immediately start following the
generated route.
Important: Do not rely on Autorouting alone
to guarantee that the route is safe to navigate.
Review the suggested route carefully and if
necessary edit the route before following.
9. Select Edit to display the Route in the Route List
You can further customize the route from the
route list. Reviewing the route list is not an
adequate method of checking a route, please
refer to
Reviewing a route generated using
Autorouting for details on how to check a route.
Once finished routes generated using Autorouting
will behave the same as any other route.
Important: Autorouting will NOT be used when
moving waypoints within routes, extra care should
be taken to ensure that the route leg and any
moved waypoints are safe to navigate.
Reviewing a route generated using Autorouting
Before you start to follow any route you should
review each waypoint and route leg to ensure it is
appropriate to follow.
With the completed route displayed on-screen:
1.
Range in on the route to identify areas of caution.
Areas of caution will be identified by the use of
the
Caution waypoint symbol before and after
the cautionary area.
2. Range in further to review the area around and
between the caution symbols.
In the example below the route passes close to a
charted buoy.
210
gS Series