Lighthouse Raymarine gS 195, Инструкция по установке и эксплуатации

Страница: 199 / 440

• Goto Waypoint
• Follow From Here (only available when waypoint
is part of a route.)
• Edit Waypoint
• Erase Waypoint
• Remove Waypoint (only available when waypoint
is part of a route.)
• Move Waypoint
• Measure
• Build Route
• Acquire Target (only available if Radar overlay is
switched on.)
• Slew thermal camera (only available when
thermal camera is connected and operating.)
For active waypoints the following menu items are
available:
• Stop Goto
• Restart XTE
• Advance Waypoint
• Measure
• Build Route
• Acquire Target (only available if Radar overlay is
switched on.)
• Slew thermal camera (only available when
thermal camera is connected and operating.)
Accessing the context menu
1. Non-touchscreen and HybridTouch displays:
i. Move the cursor over the area or object and
pressing the
Ok button.
2. HybridTouch and Touch only displays:
i. Select and hold on an area or object, or
ii. With the Chart Call-out displayed select the
Call-out box.
Waypoint placement
Placing a waypoint
You can place a waypoint on a multifunction display
with a touchscreen by following the steps below.
D 11763-2
From the chart, radar or fishfinder application:
1. Select and hold the required location on screen.
The context menu is displayed.
2. Select Place Waypoint .
The Waypoint Saved dialog is displayed.
3. Select the Symbol field to change the symbol
that will be used to display the waypoint in the
Chart or Radar application.
4. Select the Name field to change the name of
the waypoint.
5. Select the Group field to change the group that
the waypoint is assigned to.
6. Select OK to confirm the waypoint details.
Note: If there is no user interaction with
the Waypoint saved dialog for approximately 5
seconds then the waypoint is saved with the default
settings and the dialog is closed automatically.
Placing a waypoint
From the chart, radar or fishfinder application:
1. Position the cursor at the required position.
2. Press the
WPT button.
The context menu is displayed.
3. Select Place Waypoint .
The Waypoint Saved dialog is displayed.
4. Select the Symbol field to change the symbol
that will be used to display the waypoint in the
Chart or Radar application.
5. Select the Name field to change the name of
the waypoint.
6. Select the Group field to change the group that
the waypoint is assigned to.
7. Select OK to confirm the waypoint details.
Note: If there is no user interaction with
the Waypoint saved dialog for approximately 5
seconds then the waypoint is saved with the default
settings and the dialog is closed automatically.
Waypoints, Routes and Tracks
199