Lighthouse Raymarine gS 195, Инструкция по установке и эксплуатации

Страница: 243 / 440

Cartography objects
If supported by you cartography type, cartographic objects can be individually switched on and off.
The Objects menu is accessed from: Menu > Presentation > Objects .
Note: The Objects menu is only available when the cartography in use supports these features.
Note: The table below identifies the objects supported by each cartography vendor, however the object
may not be supported by all levels of cartography supplied by that vendor. Please check with your
cartography vendor for supported features.
Object Description LightHouse Navionics ® Jeppesen ®
* Sports Fishing Determines whether Jeppesen’s Sports Fishing Value
Added Data (VAD) is displayed.
* Protected
Areas
Determines whether Jeppesen’s Marine Protected
Areas Value Added Data (VAD) is displayed.
* Fishing AOI Determines whether Jeppesen’s Fishing Areas Of
Interest (AOI) Value Added Data (VAD) is displayed.
Show Rocks Determines the depth at which rocks are displayed.
Nav. Marks Determines whether navigation marks are displayed.
Nav. Mark
Symbols Determines which set of navigation mark symbols
are used — International, or US. (These symbols
correspond to paper charts).
Light Sectors Determines whether the sector of light cast by a fixed
beacon is displayed.
Routing
Systems Determines whether routing data is displayed or not.
Caution Areas
Determines whether caution data is displayed.
Marine Features Determines whether the water-based cartographic
features such as cables, tide and current stations and
port information etc. is displayed.
Land Features Determines whether land-based cartographic features
such as buildings, towers, masts and coast guard
stations etc. are displayed.
Business
Services Determines whether symbols indicating the location of
a business will be shown.
Panoramic
Photos Determines whether panoramic photos are available
for landmarks such as ports and marinas.
Roads Determines whether major coastal roads are displayed
on the chart:
Additional
Wrecks Determines whether extended information for new
wrecks is displayed.
Colored Seabed
Areas Provides greater definition of the seabed. This applies
only to limited areas where the extra detail is available.
Note: * VAD objects:
• are available at an additional cost from Jeppesen ® .
• may not be available in all areas.
Chart application
243