IBM LS42 - BladeCenter - 7902, Руководство по обслуживанию

Страница: 55 / 194

a.
Locate the CFFv card in the I/O-expansion card connector (see
“System-board connectors” on page 7).
b. Pull up on the CFFv card to remove it from the expansion connector; then,
lift the card out of the blade server.
6. If you are instructed to return the expansion card, follow all packaging
instructions, and use any packaging materials for shipping that are supplied to
you.
Installing an I/O expansion card
The following sections describe how to install the following expansion cards:
v
Small-form-factor (SFF)
v
Standard-form-factor
v
High-speed (HSDC)
v
Combination-form-factor that includes the following two card types:
– Combination-form-factor horizontal (CFFh)
– Combination-form-factor vertical (CFFv)
The following table lists the combination of expansion cards that will work in the
BladeCenter LS22 Type 7901 blade server and the single-width BladeCenter LS42
Type 7902 blade server.
Table 3. Expansion card combinations
Blade-expansion
Connector
I/O-expansion
Connector cKVM HDD 0 HDD 1
HSDC X X X
Standard-form-
factor expansion
card
X X
SFF X X X
CFFh CFFv X X X
The following table lists the combination of expansion cards that will work in the
BladeCenter LS42 Type 7902 blade server and MPE unit.
Chapter 4. Removing and replacing blade server components
43