IBM LS42 - BladeCenter - 7902, Руководство по обслуживанию

Страница: 24 / 194

Setup Utility program menu choices
The following choices are on the Setup Utility main menu. Depending on the
version of the BIOS code in the blade server, some menu choices might differ
slightly from these descriptions.
v
System Summary
Select this choice to display configuration information, including the type, speed,
and cache sizes of the microprocessors and the amount of installed memory.
When you make configuration changes through other choices in the Setup
Utility program, the changes are reflected in the system summary; you cannot
change settings directly in the system summary.
–
Processor Summary
Select this choice to view information about the microprocessors that are
installed in the blade server.
– USB Device Summary
Select this choice to view information about the USB devices that are installed
in the blade server.
v System Information
Select this choice to display information about the blade server. When you make
configuration changes through other choices in the Setup Utility program, some
of those changes are reflected in the system information; you cannot change
settings directly in the system information.
–
Product Data
Select this choice to view the machine type and model of the blade server, the
serial number, and the revision level or issue date of the BIOS and diagnostics
code that are stored in electrically erasable programmable ROM (EEPROM).
v
Devices and I/O Ports
Select this choice to view or change assignments for devices and input/output
(I/O) ports.
You can also enable or disable the integrated SAS and Ethernet controllers, all
standard ports (such as serial), and the I/O-expansion card.
Enable is the
default setting for all controllers. If you disable a device, it cannot be configured,
and the operating system will not be able to detect it (this is equivalent to
disconnecting the device). If you disable the Ethernet controller, the blade server
will have no Ethernet capability.
–
Remote Console Redirection
Select this choice to enable Serial over LAN (SOL) and to set remote console
communication parameters.
– Video
Select this choice to view information about the integrated video controller.
– System MAC Addresses
Select this choice to view the MAC addresses for the Ethernet controllers on
the blade server.
v
Date and Time
Select this choice to set the system date and time, in 24-hour format
(
hour : minute : second ).
v
System Security
Select this choice to set a power-on password. See “Using passwords” on page
14 for more information about passwords.
v
Start Options
12
BladeCenter LS22 Type 7901 and LS42 Type 7902: Problem Determination and Service Guide