IBM LS42 - BladeCenter - 7902, Руководство по обслуживанию

Страница: 63 / 194

4. Press the LS22 optimizer card down into the socket until it clicks into place.
5.
Install the blade server cover (see “Installing the blade server cover” on page
30).
6. Install the blade server into the BladeCenter unit (see “Installing the blade
server in a BladeCenter unit” on page 28).
Removing a concurrent KVM feature card
The following illustration shows how to remove the concurrent KVM feature card
from the blade server.
To remove a concurrent KVM feature card, complete the following steps:
1.
Read the safety information that begins on page “Safety statements” on page
viii and “Installation guidelines” on page 25.
2. If the blade server is installed in a BladeCenter unit, remove it (see “Removing
the blade server from a BladeCenter unit” on page 27).
3. Remove the blade server cover (see “Removing the blade server cover” on page
29).
4. If an MPE unit is installed, remove the MPE unit (see “Removing an expansion
unit” on page 31).
5. If any of the following expansion cards are installed in the blade server, remove
them:
v
Small-form-factor card (see “Removing a small-form-factor expansion card”
on page 40)
v
Combination-form-factor card (see “Removing a combination-form-factor
expansion card” on page 42)
v
High-speed expansion card (see “Removing a high-speed expansion card” on
page 41)
6. Gently pivot the narrow end of the card out of the concurrent-KVM connector;
then, slide the notched end of the card out of the tabs on the expansion card
bracket and lift the card out of the blade server.
7. If you are instructed to return the concurrent KVM feature card, follow all
packaging instructions, and use any packaging materials for shipping that are
supplied to you.
Installing a concurrent KVM feature card
The following illustration shows how to install a concurrent KVM feature card in
the blade server.
Chapter 4. Removing and replacing blade server components
51