IBM LS42 - BladeCenter - 7902, Руководство по обслуживанию

Страница: 137 / 194

Table 4. Diagnostic error codes (continued)
v
Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
v
See Chapter 3, “Parts listing, Types 7901 and 7902,” on page 19 to determine which components are customer
replaceable units (CRU) and which components are field replaceable units (FRU).
v If an action step is preceded by “(Trained service technician only),” that step must be performed only by a
trained service technician.
Message
number
Component Test State Description Action
201–811–xxx Memory Memory
Test Abort Test aborted:
Unable to
locate _SM_
key when
locating
SMBIOS
structure data
1. Reseat the blade server (see “Removing
the blade server from a BladeCenter
unit” on page 27 and “Installing the
blade server in a BladeCenter unit” on
page 28).
2. Make sure that the DSA code is at the
latest level. For the latest level of DSA
code, go to http://www.ibm.com/
support/docview.wss?uid=psg1SERV-
DSA.
3. Make sure that the system BIOS code
is at the latest level. The installed
firmware level is shown in the DSA
event log in the Firmware/VPD section
for this component. For the latest level
of firmware, go to
http://www.ibm.com/support/
docview.wss?uid=psg1 MIGR-4JTS2T
and select your system to display a
matrix of available firmware.
4. Run the test again.
5. Reseat the memory modules (see
“Removing a memory module” on
page 37 and “Installing a memory
module” on page 38).
6. Replace the failing DIMMs (see
“Removing a memory module” on
page 37 and “Installing a memory
module” on page 38).
Chapter 5. Diagnostics
125