IBM LS42 - BladeCenter - 7902, Руководство по обслуживанию

Страница: 123 / 194

v
From the DSA interactive menu, select getextendedresults .
v
From the DSA interactive menu, select view to view all of the collected results
and error log data.
v
From the System Information page in the DSA graphical user interface, select
DSA Error Log .
You can send the DSA error log file to IBM service and support to aid in
diagnosing the server problems or you can use the DSA CLI
copy command to
copy the log to an external USB device.
Dynamic System Analysis diagnostic messages
The following table describes the messages that the DSA diagnostic programs
might generate and suggested actions to correct the detected problems. Follow the
suggested actions in the order in which they are listed in the action column.
In the error codes, x can be any numeral or letter. However, if the three-digit
number in the central position of the code is 000, 195, or 197, do not replace a CRU
or FRU. When these numbers are in the central position of the code, they have the
following meanings:
000 The blade server passed the test. Do not replace a CRU or FRU.
195 The Esc key was pressed to end the test. Do not replace a CRU or FRU.
197 This is a warning error, but it does not indicate a hardware failure; do not
replace a CRU or FRU. Take the action that is indicated in the Action
column, but
do not replace a CRU or a FRU .
Chapter 5. Diagnostics
111