IBM LS42 - BladeCenter - 7902, Руководство по обслуживанию

Страница: 149 / 194

Table 4. Diagnostic error codes (continued)
v
Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
v
See Chapter 3, “Parts listing, Types 7901 and 7902,” on page 19 to determine which components are customer
replaceable units (CRU) and which components are field replaceable units (FRU).
v If an action step is preceded by “(Trained service technician only),” that step must be performed only by a
trained service technician.
Message
number
Component Test State Description Action
202-802-xxx Memory Memory
Stress Test Abort Test aborted.
Memory size is
insufficient to
run the test. At
least 1 GB of
memory is
required to run
the test.
1. Turn off and restart the system.
2. Run the test again.
3. Make sure that the DSA code is at the
latest level. For the latest level of DSA
code, go to http://www.ibm.com/
support/docview.wss?uid=psg1SERV-
DSA.
4. Run the test again.
5. Run the standard memory test to
validate all memory.
6. See “Solving undetermined problems”
on page 164.
202-901-xxx Memory Memory
Stress Test Failed Test failure.
1. Run the standard memory test to
validate all memory.
2.
Make sure that the DSA code is at the
latest level. For the latest level of DSA
code, go to http://www.ibm.com/
support/docview.wss?uid=psg1SERV-
DSA.
3. Reseat the DIMMs (see “Removing a
memory module” on page 37 and
“Installing a memory module” on page
38).
4. Run the test again.
5.
Run the standard DSA memory
diagnostic to validate all memory.
6. See “Solving undetermined problems”
on page 164.
215–000–xxx Optical drive Self-test Pass The optical drive passed the test. No
action is required.
Chapter 5. Diagnostics
137