IBM LS42 - BladeCenter - 7902, Руководство по обслуживанию

Страница: 138 / 194

Table 4. Diagnostic error codes (continued)
v
Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
v
See Chapter 3, “Parts listing, Types 7901 and 7902,” on page 19 to determine which components are customer
replaceable units (CRU) and which components are field replaceable units (FRU).
v If an action step is preceded by “(Trained service technician only),” that step must be performed only by a
trained service technician.
Message
number
Component Test State Description Action
201–812–xxx Memory Memory
Test Abort Test aborted:
SMBIOS type 0
structure
indicates
invalid
machine ID
that is not
supported.
1. Turn off and restart the system.
2. Run the test again.
3. Make sure that the system BIOS code
is at the latest level. The installed
firmware level is shown in the DSA
event log in the Firmware/VPD section
for this component. For the latest level
of firmware, go to
http://www.ibm.com/support/
docview.wss?uid=psg1 MIGR-4JTS2T
and select your system to display a
matrix of available firmware.
4. Run the test again.
5. Verify the settings in the Setup Utility
program (see “Using the Setup Utility
program” on page 11).
6. Make sure that the DSA code is at the
latest level. For the latest level of DSA
code, go to http://www.ibm.com/
support/docview.wss?uid=psg1SERV-
DSA.
7. Run the test again.
126
BladeCenter LS22 Type 7901 and LS42 Type 7902: Problem Determination and Service Guide