IBM LS42 - BladeCenter - 7902, Руководство по обслуживанию

Страница: 57 / 194

To install a small-form-factor expansion card, complete the following steps.
1. Touch the static-protective package that contains the expansion card to any
unpainted metal surface on the BladeCenter unit or any unpainted metal surface
on any other grounded rack component; then, remove the expansion card from
the package.
2. Orient the expansion card over the expansion-card connectors.
3. Slide the notch in the narrow end of the card into the raised hook on the
expansion-card bracket; then, gently pivot the card into the expansion-card
connectors.
Note:
For device-driver and configuration information to complete the
installation of the expansion card, see the documentation that comes with the
expansion card.
4. Install the MPE unit or expansion unit, if you removed one while you removed
the expansion card (see “Installing an expansion unit” on page 32).
5. Install the blade server cover (see “Installing the blade server cover” on page
30).
6. Install the blade server into the BladeCenter unit (see “Installing the blade
server in a BladeCenter unit” on page 28).
Installing a standard-form-factor expansion card
The following illustration shows how to install a standard-form-factor expansion
card in the blade server; installing a standard-form-factor expansion card in the
MPE unit is similar.
To install a standard-form-factor expansion card, complete the following steps.
Chapter 4. Removing and replacing blade server components
45