v
Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
v
See Chapter 3, “Parts listing, Types 7901 and 7902,” on page 19 to determine which components are CRUs and
which components are FRUs.
v
If an action step is preceded by “(Trained service technician only),” that step must be performed only by a
trained service technician.
Message
Action
System over recommended 5V fault.
1.
Reseat the blade server (see “Removing the blade server from a
BladeCenter unit” on page 27 and “Installing the blade server in a
BladeCenter unit” on page 28).
2.
Check the function of the shared BladeCenter unit resources (see
“Solving shared BladeCenter resource problems” on page 160).
3.
(Trained service technician only) Replace the system-board
assembly (see “Removing the system-board assembly” on page 62
and “Installing the system-board assembly” on page 62).
VRM voltage over recommended tolerance.
1.
Reseat the blade server (see “Removing the blade server from a
BladeCenter unit” on page 27 and “Installing the blade server in a
BladeCenter unit” on page 28).
2.
Check the function of the shared BladeCenter unit resources (see
“Solving shared BladeCenter resource problems” on page 160).
3.
(Trained service technician only) Replace the system-board
assembly (see “Removing the system-board assembly” on page 62
and “Installing the system-board assembly” on page 62).
System under recommended voltage for
+12v.
1.
Reseat the blade server (see “Removing the blade server from a
BladeCenter unit” on page 27 and “Installing the blade server in a
BladeCenter unit” on page 28).
2.
Check the function of the shared BladeCenter unit resources (see
“Solving shared BladeCenter resource problems” on page 160).
3.
(Trained service technician only) Replace the system-board
assembly (see “Removing the system-board assembly” on page 62
and “Installing the system-board assembly” on page 62).
System under recommended voltage for
+3.3v.
1.
Reseat the blade server (see “Removing the blade server from a
BladeCenter unit” on page 27 and “Installing the blade server in a
BladeCenter unit” on page 28).
2.
Check the function of the shared BladeCenter unit resources (see
“Solving shared BladeCenter resource problems” on page 160).
3.
(Trained service technician only) Replace the system-board
assembly (see “Removing the system-board assembly” on page 62
and “Installing the system-board assembly” on page 62).
System under recommended 5V fault.
1.
Reseat the blade server (see “Removing the blade server from a
BladeCenter unit” on page 27 and “Installing the blade server in a
BladeCenter unit” on page 28).
2.
Check the function of the shared BladeCenter unit resources (see
“Solving shared BladeCenter resource problems” on page 160).
3.
(Trained service technician only) Replace the system-board
assembly (see “Removing the system-board assembly” on page 62
and “Installing the system-board assembly” on page 62).
Chapter 5. Diagnostics
97
Содержание LS42 - BladeCenter - 7902
