IBM LS42 - BladeCenter - 7902, Руководство по обслуживанию

Страница: 48 / 194

To remove a SAS drive, complete the following steps.
1.
Read the safety information that begins on page “Safety statements” on page
viii and “Installation guidelines” on page 25.
2. If the blade server is installed in a BladeCenter unit, remove it (see “Removing
the blade server from a BladeCenter unit” on page 27).
3. Remove the blade server cover (see “Removing the blade server cover” on page
29).
4. If you are removing a drive from the blade server and an MPE unit or
expansion unit is installed, remove the MPE unit (see “Removing an expansion
unit” on page 31).
5. Press the release lever away from the SAS drive; then, remove the SAS drive.
Attention:
If two SAS drives are installed, you might damage one or both of
the drives if you use too much force to remove the drive.
v
If you are removing a SAS drive from SAS connector 0, slide the drive
backward to disengage it from the connector at the front of the drive tray;
then, lift the drive out of the drive tray.
v
If you are removing a SAS drive from SAS connector 1, slide the drive
forward to disengage it from the connector at the rear of the drive tray then,
lift the drive out of the drive tray.
6. If you are instructed to return the drive, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Installing a SAS drive
The following illustration shows how to install the SAS drive in the blade server.
To install a SAS drive, complete the following steps.
1. Touch the static-protective package that contains the hard disk drive to any
unpainted metal surface on the BladeCenter unit or any unpainted metal surface
on any other grounded rack component; then, remove the hard disk drive from
the package.
Attention: Do not press on the top of the drive. Pressing the top might
damage the drive.
2.
Place the hard disk drive into the drive tray and push it into the connector at
the end of the drive tray, until the drive moves past the lever at the front of the
tray.
36
BladeCenter LS22 Type 7901 and LS42 Type 7902: Problem Determination and Service Guide