IBM LS42 - BladeCenter - 7902, Руководство по обслуживанию

Страница: 26 / 194

v
Restore Settings
Select this choice to cancel the changes that you have made in the settings and
restore the previous settings.
v
Load Default Settings
Select this choice to cancel the changes that you have made in the settings and
restore the factory settings.
v Exit Setup
Select this choice to exit from the Setup Utility program. If you have not saved
the changes that you have made in the settings, you are asked whether you
want to save the changes or exit without saving them.
Using passwords
From the System Security choice, you can set, change, and delete a power-on
password.
If you set a power-on password, you must type the power-on password to
complete the system startup and to have access to the Setup Utility menu.
You can use any combination of up to seven characters (A - Z, a - z, and 0 - 9) for
the password. Keep a record of your password in a secure place.
If you forget the power-on password, you can regain access to the blade server by
removing the blade server battery and then reinstalling it (see “Removing the
battery” on page 48 and “Installing the battery” on page 48), or by using the
power-on password override switch (see “System-board switches” on page 8).
Using the ServerGuide Setup and Installation CD
The ServerGuide Setup and Installation CD contains a setup and installation program
that is designed for your blade server. The ServerGuide program detects the blade
server model and optional hardware devices that are installed and uses that
information during setup to configure the hardware. The ServerGuide program
simplifies operating-system installations by providing updated device drivers and,
in some cases, installing them automatically.
If a later version of the ServerGuide program is available, you can download a free
image of the
ServerGuide Setup and Installation CD, or purchase the CD from the
fulfillment Web site at http://www.ibm.com/systems/management/serverguide/
sub.html. To download the free image, click
IBM Service and Support Site .
Note: Changes are made periodically to the IBM Web site. The actual procedure
might vary slightly from what is in this document.
The ServerGuide program has the following features to make setup easier:
v
An easy-to-use interface
v
Diskette-free setup and configuration programs that are based on detected
hardware
v
Device drivers that are provided for the blade server model and detected
hardware
v
Operating-system partition size and file-system type that are selectable during
setup
14
BladeCenter LS22 Type 7901 and LS42 Type 7902: Problem Determination and Service Guide