Command Manual (For Soliton) – IP Address-IP Performance
H3C S3100 Series Ethernet Switches
Chapter 2 IP Performance Configuration
Commands
2-2
Table 2-1
Description on the fields of the
display fib
command
Field
Description
Flag
Flags:
U: A route is up and available.
G: Gateway route
H: Local host route
B: Blackhole route
D: Dynamic route
S: Static route
R: Rejected route
E: Multi-path equal-cost route
L: Route generated by ARP or ESIS
Destination/Mask Destination address/mask length
Nexthop
Next hop address
TimeStamp Timestamp
Interface Forwarding
interface
2.1.2 display fib ip-address
Syntax
display
fib ip-address1
[ {
mask1 | mask-length1
} [
ip-address2
{
mask2 |
mask-length2
}
|
longer
] |
longer
]
View
Any view
Parameters
ip-address1, ip-address2
: Destination IP addresses, in dotted decimal notation.
ip-address1
and
ip-address2
together define an address range. The FIB entries in this
address range will be displayed.
mask1, mask2
: Subnet masks, in dotted decimal notation.
mask-length1, mask-length2
: Length of the subnet masks, the number of consecutive
ones in the masks, in the range of 0 to 32.
longer
: Displays the FIB entries matching the specified address/mask and having
masks longer than or equal to the specified mask. If no masks are specified, FIB entries
that match the natural network address and have the masks longer than or equal to the
natural mask will be displayed.
