Command Manual (For Soliton) – Port Basic Configuration
H3C S3100 Series Ethernet Switches
Chapter 1 Port Basic Configuration
Commands
1-23
Example
# Set the maximum frame size allowed on Ethernet 1/0/1 to 2048 bytes.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Ethernet 1/0/1
[Sysname-Ethernet1/0/1] jumboframe enable
1.1.17 link-delay
Syntax
link-delay delay-time
undo link-delay
View
Ethernet port view
Parameters
delay-time
: Port state change delay to be set. This argument is in the range 2 to 10 (in
seconds).
Description
Use the
link-delay
command to set the port state change delay.
Use the
undo link-delay
command to restore the default.
By default, the port state change delay is 0 seconds, that is, the port state changes
without any delay.
Note:
z
The port state change delay takes effect when the port goes down but not when the
port goes up.
z
The delay configured in this way does not take effect for ports in DLDP down state.
For information about the DLDP down state, refer to
DLDP
.
Examples
# Set the port state change delay of Ethernet 1/0/5 to 8 seconds.
<Sysname> system-view
Enter system view, return to user view with Ctrl+Z.
[Sysname] interface Ethernet1/0/5
