Command Manual (For Soliton) – Login
H3C S3100 Series Ethernet Switches
Chapter 1 Login Commands
1-25
2
: Sets the stopbits to 2.
Description
Use the
stopbits
command to set the stopbits of the user interface.
Use the
undo stopbits
command to revert to the default stopbits.
Execute these two commands in AUX user interface view only.
By default, the stopbits is 1.
Note:
z
The S3100 series do not support communication with a terminal emulation program
with stopbits set to 1.5.
z
Changing the stop bits value of the switch to a value different from that of the
terminal emulation utility does not affect the communication between them.
Examples
# Set the stop bits to 2.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] user-interface aux 0
[Sysname-ui-aux0] stopbits 2
1.1.23 telnet
Syntax
telnet
{
hostname
|
ip-address
} [
service-port
]
[
source-interface interface-type
interface-number | source-ip ip-address
]
View
User view
Parameters
hostname
: Host name of the remote device, a string of 1 to 20 characters.
ip-address
: IPv4 address of the remote device.
service-port
: Number of the TCP port through which the remote device provides Telnet
service. This argument ranges from 0 to 65535, and defaults to 23.
source-interface interface-type interface-number
: Specifies the type and number of
the source interface.
