H3C S3100 Series, Руководство по управлению

Страница: 923 / 1089

Command Manual (For Soliton) – System Maintenance and Debugging
H3C S3100 Series Ethernet Switches Chapter 3 Device Management
Commands
3-9
Field Remarks
Receive optical power fault Receive optical power fault
PMA/PMD receiver local fault
PMA/PMD (Physical Medium
Attachment/Physical Medium Dependent)
receiver local fault
PCS receive local fault
PCS (Physical Coding Sublayer) receiver local
fault
PHY XS receive local fault
PHY XS (PHY Extended Sublayer) receive
local fault
RX power high RX power is high.
RX power low RX power is low.
Laser bias current fault Laser bias current fault
Laser temperature fault Laser temperature fault
Laser output power fault Laser output power fault
TX fault TX fault
PMA/PMD receiver local fault PMA/PMD receiver local fault
PCS receive local fault PCS receive local fault
PHY XS receive local fault PHY XS receive local fault
TX bias high TX bias current is high.
TX bias low TX bias current is low.
TX power high TX power is high.
TX power low TX power is low.
Temp high Temperature is high.
Temp low Temperature is low.
Transceiver info I/O error Transceiver information read and write error
Transceiver info checksum error Transceiver information checksum error
Transceiver type and port
configuration mismatch Transceiver type does not match port
configuration.
Transceiver type not supported by
port hardware
Transceiver type is not supported on the port.
Note:
For pluggable transceivers supported by S3100 series Ethernet switches, refer to H3C
S3100 Series Ethernet Switches Installation Manual(For Soliton) .