Command Manual (For Soliton) – HWPing
H3C S3100 Series Ethernet Switches
Chapter 1 HWPing Commands
1-4
By default, no destination port number is configured for a test.
Related commands:
destination-ip
.
Note:
z
The
destination-port
command has effect on jitter, TCP-Private, and UDP-Private
tests only.
z
You are not recommended to perform a TCP, UDP, or jitter test on a well-known port
(ports with a number ranging from 1 to 1023) or on a port with a port number greater
than 50000. Otherwise, the HWPing test will fail or the corresponding service of the
well-known port will become unavailable.
Examples
# Set the destination port number for a tcpprivate test to 9000.
<Sysname> system-view
System View: return to User View with Ctrl+Z
[Sysname] hwping administrator tcp
[Sysname-hwping-administrator-tcp] test-type tcpprivate
[Sysname-hwping-administrator-tcp] destination-port 9000
1.1.5 display hwping
Syntax
display hwping
{
results
|
history
} [
administrator-name
operation-tag
]
View
Any view
Parameters
results
: Displays results of the last test.
history
: Displays the history records of tests.
administrator-name
: Name of the administrator who created the HWPing test operation,
a string of 1 to 32 characters.
operation-tag
: Operation tag, a string of 1 to 32 characters.
Description
Use the
display hwping
command to display the result of the last HWPing test or the
history of HWPing tests.