Command Manual (For Soliton) – IPv6 Management
H3C S3100 Series Ethernet Switches
Chapter 2 IPv6 Application Configuration
Commands
2-5
same as the source file’s.
Description
Use the
tftp ipv6
command to perform the following operations:
z
Download a file: Download a specified source file from TFTP server to local.
z
Upload a file: Upload a specified source file from local to TFTP server.
Examples
# Download a file from TFTP server.
<Sysname> tftp ipv6 fe80::250:daff:fe91:e058 -i Vlan-interface 300 get
filetoget
.
File will be transferred in binary mode
Downloading file from remote tftp server, please wait..... received: 4469
bytes in 1.243 seconds.
2.1.4 tracert ipv6
Syntax
tracert ipv6
[
-f
first-ttl
|
-m
max-ttl
|
-p
port
|
-q
packet-num
|
-w
timeout
]*
remote-system
View
Any view
Parameters
-f first-ttl
: Specifies the first TTL, that is, the allowed number of hops for the first packet.
Ranges from 1 to 255, defaults to 1, and must be less than the maximum TTL.
-m max-ttl
: Specifies the maximum TTL, that is, the maximum allowed number of hops
for a packet. The value ranges from 1 to 255, defaults to 30. It must be greater than the
first TTL.
-p port
: Specifies the port number of the destination UDP, ranging from 1 to 65535, with
the default of 33434.
-q packet-num
: Specifies the maximum number of packets sent to a hop, ranging from
1 to 65535, with the default of 3.
-w
timeout
: Specifies the timeout in milliseconds of waiting ICMPv6 echoes, ranging
from 1 to 65,535, with the default of 5,000 milliseconds.
remote-system
: IPv6 address or host name (a string a 1 to 46 characters) of the
destination device.
