H3C S3100 Series, Руководство по управлению

Страница: 450 / 1089

Command Manual (For Soliton) – AAA
H3C S3100 Series Ethernet Switches
Chapter 1 AAA Configuration Commands
1-50
Parameters
radius-scheme-name
: Name of the RADIUS scheme to be created, a string of up to 32
characters.
Description
Use the
radius scheme
command to create a RADIUS scheme and enter its view.
Use the
undo radius scheme
command to delete a specified RADIUS scheme.
By default, a RADIUS scheme named "system" has already been created in the
system.
Note that:
z
All the attributes of RADIUS scheme "system" take the default values, which you
can see by using the
display radius scheme
command.
z
The RADIUS protocol configuration is performed on a RADIUS scheme basis. For
each RADIUS scheme, you should specify at least the IP addresses and UDP port
numbers of the RADIUS authentication/authorization and accounting servers, and
the parameters required for the RADIUS client to interact with the RADIUS servers.
You should first create a RADIUS scheme and enter its view before performing
RADIUS protocol configurations.
z
A RADIUS scheme can be referenced by multiple ISP domains simultaneously.
z
The
undo radius scheme
command cannot delete the default RADIUS scheme.
In addition, you are not allowed to delete a RADIUS scheme which is being used
by an online user.
Related commands:
key
,
retry realtime-accounting
,
scheme
,
timer
realtime-accounting
,
stop-accounting-buffer enable
,
retry stop-accounting
,
server-type
,
state
,
user-name-format
,
retry
,
display radius scheme
,
display
radius statistics
.
Examples
# Create a RADIUS scheme named radius1 and enter its view.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] radius scheme radius1
New Radius scheme
[Sysname-radius-radius1]
1.2.18 radius trap
Syntax
radius trap
{
authentication-server-down | accounting-server-down
}
undo radius trap
{
authentication-server-down | accounting-server-down
}