Command Manual (For Soliton) – HWPing
H3C S3100 Series Ethernet Switches
Chapter 1 HWPing Commands
1-5
Without
administrator-name
test-operation-tag
specified, the command displays the
results of all test groups; without
administrator-name
test-operation-tag
specified, the
command displays the results of the specified test group.
Related commands:
test-enable
.
Examples
# Display the result of the test group with the administrator name being administrator,
and the operation tag being icmp.
[Sysname-hwping-administrator-icmp] display hwping results administrator
icmp
HWPing entry(admin administrator, tag icmp) test result:
Destinationip address:10.2.2.2
Send operation times: 10 Receive response times: 10
Min/Max/Average Round Trip Time: 1/2/1
Square-Sum of Round Trip Time: 13
Last succeeded test time: 2004-11-25 16:28:55.0
Extend result:
SD Maximal delay: 0 DS Maximal delay: 0
Packet lost in test: 0%
Disconnect operation number:0 Operation timeout number:0
System busy operation number:0 Connection fail number:0
Operation sequence errors:0 Drop operation number:0
Other operation errors:0
Table 1-2
Description on the fields of the
display hwping result
command
Field
Description
Destination ip address
Destination IP address
Send operation times
Number of probes made
Receive response times
Number of received response packets
Min/Max/Average Round Trip Time
Minimum/maximum/average roundtrip time
Square-Sum of Round Trip Time
Square sum of roundtrip time
Last succeeded test time
Completion time of the last successful test
SD Maximal delay
Maximum delay from the source to the
destination
DS Maximal delay
Maximum delay from the destination to the
source
Packet lost in test
Average packet loss ratio
Disconnect operation number
Number of times the test was disconnected by
the remote end
