Command Manual (For Soliton) – Configuration File Management
H3C S3100 Series Ethernet Switches
Chapter 1 Configuration File
Management Commands
1-12
Parameters
backup
: Erases the backup configuration file.
main
: Erases the main configuration file.
Description
Use the
reset
saved-configuration
command to erase the configuration file saved in
the Flash of a switch.
The following two situations exist:
z
While the
reset saved-configuration
[
main
] command erases the configuration
file with main attribute, it only erases the main attribute of a configuration file
having both main and backup attribute.
z
While the
reset saved-configuration backup
command erases the configuration
file with backup attribute, it only erases the backup attribute of a configuration file
having both main and backup attribute.
You may need to erase the configuration file for one of these reasons:
z
After you upgrade software, the old configuration file does not match the new
software.
z
The startup configuration file is corrupted or not the one you need.
Caution:
z
This command will permanently delete the configuration file from the switch.
z
An error occurs when you execute this command if the configuration file to be
deleted does not exist.
Related commands:
save
.
Examples
# Erase the main configuration file to be used in the next startup.
<Sysname> reset saved-configuration main
The saved configuration will be erased.
Are you sure?[Y/N]y
Configuration in flash memory is being cleared.
Please wait ...
....
Unit1 reset saved-configuration successfully.
