Command Manual (For Soliton) – Information Center
H3C S3100 Series Ethernet Switches
Chapter 1 Information Center Configuration
Commands
1-17
Note:
z
The synchronous information output function is used in the case that your input is
interrupted by a large amount of system output. With this function enabled, the
system echoes your previous input and you can continue your operations from
where you were stopped.
z
Running the
info-center synchronous
command during debugging information
collection may result in a command prompt echoed after each item of debugging
information. To avoid unnecessary output, it is recommended to disable
synchronous information output in such case.
Example
# Enable synchronous information output.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname]info-center synchronous
Current IC terminal output sync is on
1.1.16 info-center timestamp
Syntax
info-center timestamp
{
log
|
trap
|
debugging
} {
boot
|
date
|
none
}
undo info-center timestamp
{
log
|
trap
|
debugging
}
View
System view
Parameter
log
: Specifies log information.
trap
: Specifies trap information.
debugging
: Specifies debugging information.
boot
: Specifies to adopt the time elapsed since system boot, which is in the format of
“xxxxxx.yyyyyy”, where xxxxxx is the high 32 bits and yyyyyy the low 32 bits of the
elapsed milliseconds.
date
: The current system date and time, in the format of “Mmm dd hh:mm:ss:sss yyyy”.
z
Mmm: The abbreviations of the months in English, which could be Jan, Feb, Mar,
Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, or Dec.
z
dd: The date, starting with a space if less than 10, for example “ 7”.
