Command Manual (For Soliton) – 802.1x-System Guard
H3C S3100 Series Ethernet Switches
Chapter 3 HABP Configuration
Commands
3-4
If an 802.1x-enabled switch does not have HABP enabled, it cannot manage the
switches attached to it. So, you need to enable HABP on specific switches in a network
with 802.1x enabled.
Example
# Enable HABP.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] habp enable
3.1.5 habp server vlan
Syntax
habp server vlan
vlan-id
undo habp server
View
System view
Parameter
vlan-id
: VLAN ID, ranging from 1 to 4094.
Description
Use the
habp server vlan
command to configure a switch to operate as an HABP
server. This command also specifies the VLAN where HABP packets are broadcast.
Use the
undo habp server vlan
command to revert to the default HABP mode.
By default, a switch operates as an HABP client.
To specify a switch to operate as an HABP server, you need to enable HABP (using the
habp enable
command) for the switch first. When HABP is not enabled, the
habp
server vlan
command cannot take effect.
Example
# Specify the switch to operate as an HABP server and the HABP packets to be
broadcast in VLAN 2. (Assume that HABP is enabled.)
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] habp server vlan 2