Command Manual (For Soliton) – MSTP
H3C S3100 Series Ethernet Switches
Chapter 1 MSTP Configuration Commands
1-13
View
MST region view
Parameters
name
: MST region name to be set for the switch, a string of 1 to 32 characters.
Description
Use the
region-name
command to set an MST region name for a switch.
Use the
undo region-name
command to restore the MST region name to the default
value.
The default MST region name of a switch is its MAC address.
MST region name, along with VLAN-to-MSTI mapping table and MSTP revision level,
determines the MST region which a switch belongs to.
Related commands:
instance
,
revision-level
,
check region-configuration
,
vlan-mapping modulo
,
active region-configuration
.
Examples
# Set the MST region name of the switch to
hello
.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] stp region-configuration
[Sysname-mst-region] region-name hello
1.1.11 reset stp
Syntax
reset stp
[
interface
interface-list
]
View
User view
Parameters
interface-list
: Ethernet port list. You can specify multiple Ethernet ports by providing this
argument in the form of
interface-list =
{
interface-type interface-number
[
to
interface-type interface-number
] } &<1-10>, where &<1-10> means that you can
provide up to 10 port indexes/port index ranges for this argument.
Description
Use the
reset stp
command to clear spanning tree statistics.
