Command Manual (For Soliton) – HWPing
H3C S3100 Series Ethernet Switches
Chapter 1 HWPing Commands
1-12
Field
Description
DNS Resolve Timeout Times
DNS resolution timeout times
DNS Resolve Failed Times
Number of failed DNS resolutions
Note:
The description on a specific field is available for the test results of all types of tests, so
that not the description on the output information of all types of tests is provided here.
1.1.6 dns-server
Syntax
dns-server ip-address
undo dns-server
View
HWPing test group view
Parameters
ip-address
: IP address to be assigned to a domain name server (DNS).
Description
Use the
dns-server
command to configure the IP address of a DNS server.
Use the
undo dns-server
command to remove the IP address of a DNS server.
By default, no DNS server IP address is configured.
Note:
z
This command applies to DNS and HTTP tests only.
z
For an HTTP test, if configuring the destination address as the host name, you must
configure the IP address of the DNS server to resolve the host name into an IP
address, which is the destination IP address of this HTTP test
Examples
# Set 192.168.1.1 as the IP address of the DNS server.
<Sysname> system-view