Command Manual (For Soliton) – Smart Link-Monitor Link
H3C S3100 Series Ethernet Switches
Chapter 2 Monitor Link Configuration
Commands
2-4
2.1.4 port
Syntax
port interface-type interface-number
{
uplink
|
downlink
}
undo port interface-type interface-number
View
Monitor Link group view
Parameter
interface-type
: Port type.
interface-number
: Port number.
uplink
:
Configures the specified port as the uplink port of the Monitor Link group
downlink
:
Configures the specified port as the downlink port of the Monitor Link group
Description
Use the
port
command to configure the specified port as a member of the Monitor Link
group.
Use the
undo port
command to remove the specified port from the current Monitor Link
group.
In Monitor Link, a Monitor Link group member can be a single port, a static link
aggregation group, but not a dynamic link aggregation group. The uplink port of a
Monitor Link group can also be a Smart Link group.
Do not use this command on member ports of a link aggregation group or a Smart Link
group.
Note:
A port or a link aggregation group cannot serve as a member port for two Smart Link
groups. On the other hand, a port or a link aggregation group cannot serve as a
member for a Smart Link group and a Monitor Link group at the same time. However, a
Smart Link group can serve as the uplink member port of a Monitor Link group.
Example
# Configure Ethernet1/0/7 as a downlink port of the Monitor Link group
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] monitor-link group 1