Command Manual (For Soliton) – MAC Address Authentication
H3C S3100 Series Ethernet Switches
Chapter 1 MAC Address Authentication
Configuration Commands
1-10
Parameters
offline-detect-value
: Offline detect timer (in seconds) setting. This argument ranges
from 1 to 65,535 and defaults to 300. The offline detect timer sets the time interval for a
switch to test whether a user goes offline.
quiet-value
: Quiet timer (in seconds) setting. This argument ranges from 1 to 3,600 and
defaults to 60. After a user fails to pass the authentication performed by a switch, the
switch quiets for a specific period (the quiet period) before it authenticates the user
again.
server-timeout-value
: Server timeout timer setting (in seconds). This argument ranges
from 1 to 65,535 and defaults to 100. During authentication, the switch prohibits a user
from accessing the network if the connection between the switch and the RADIUS
server times out.
Description
Use the
mac-authentication
timer
command to configure the timers used in MAC
address authentication.
Use the
undo mac-authentication
timer
command to restore a timer to its default
setting.
Related commands:
display mac-authentication
.
Examples
# Set the server timeout timer to 150 seconds.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] mac-authentication timer server-timeout 150
1.1.10 reset mac-authentication
Syntax
reset mac-authentication statistics
[
interface interface-list
]
View
User view
Parameters
interface-list
: List of Ethernet ports. You can specify multiple Ethernet ports by providing
this argument in the form of
interface-list =
{
interface-type interface-number
[
to
interface-type interface-number
] } &<1-10>, where &<1-10> means that you can
provide up to 10 port indexes/port index ranges for this argument.
