manualshive.com logo in svg

Daikin RXYQ5PY1, Руководство по обслуживанию

На нашем сайте вы можете скачать бесплатно сервисный мануал для Daikin RXYQ5PY1. Этот руководство поможет вам правильно обслуживать и настраивать ваш кондиционер. Скачайте его сейчас с manualshive.com и получите подробные инструкции по эксплуатации вашего устройства.

Поделиться
Скачать
background image

Heat Pump 60Hz (RXYQ5~54P)

SiEN34-705

262

Installation Manual

2.1 First of All

!

This document is an installation manual for the Daikin RXYQ-P Series VRV Inverter. Before 
installing the unit, read this manual thoroughly, and following the instructions contained in it. 
After installation, do a test run to make sure the unit runs properly, and then explain how to 
operate and take care of the unit to the customer, using the operation manual.

!

Lastly, make sure the customer keeps this manual, along with the operation manual, in a 
safe place.

!

This manual does not describe how to install the indoor unit.
Refer to the installation manual included with the indoor unit for that.

2.1.1 Safety considerations

Please read these “Safety considerations” carefully before installing air conditioning unit and be 
sure to install it correctly.  The safety precautions listed here are divided into two categories. 
In either case, important safety information is listed which must be read carefully.

Warning:

Failure to observe a warning may result in death or serious injury.

 Caution:

Failure to observe a caution may result in injury or damage to the unit.
These too might lead to serious injury depending on the circumstances.

Warning:

!

Ask your dealer or qualified personnel to carry out installation work. Do not try to install the 
machine yourself.
Improper installation may result in water leakage, electric shocks or fire.

!

Perform installation work in accordance with this installation manual.
Improper installation may result in water leakage, electric shocks or fire.

!

When installing the unit in a small room, take measures against to keep refrigerant 
concentration from exceeding allowable safety limits in the event of refrigerant leakage.
Contact your dealer for more information. Excessive refrigerant in a closed ambient can lead 
to oxygen deficiency.

!

Be sure to use only the specified accessories and parts for installation work.
Failure to use the specified parts may result in water leakage, electric shocks, fire or the unit 
falling.

!

Install the air conditioner on a foundation strong enough to withstand the weight of the unit.
A foundation of insufficient strength may result in the unit falling and causing injuries.

!

Carry out the specified installation work after taking into account strong winds, typhoons or 
earthquakes.
Improper installation work may result in the unit falling and causing accidents.

!

Make sure that a separate power supply circuit is provided for this unit and that all electrical 
work is carried out by qualified personnel according to local and national regulations and this 
installation manual.
An insufficient power supply capacity or improper electrical construction may lead to electric 
shocks or fire.

!

Make sure that all wiring is secured, the specified wires are used, and no external forces act 
on the terminal connections or wires.
Improper connections or installation may result in the terminals overheating or fire.

!

When wiring the power supply and connecting the remote control wiring and transmission 
wiring, position the wires so that the EL.COMPO.BOX lid can be securely fastened.
Improper positioning of the EL.COMPO.BOX lid may result in electric shocks or fire.

!

If the refrigerant gas leaks during installation, ventilate the area immediately.
Toxic gas may be produced if the refrigerant gas comes into contact with fire.

!

After completing the installation work, check that the refrigerant gas does not leak.
Toxic gas may be produced if the refrigerant gas leaks into the room and comes into contact 
with a source of fire, such as a fan heater, stove or cooker.

!

Do not directly touch the refrigerant leaked from refrigerant piping connections.
Frostbite may be caused.

!

Before touching electrical parts, turn off the power.

!

Do not allow children to mount on the outdoor unit, or avoid placing any object on it. Falling 
or tumble may result in injury.

Содержание RXYQ5PY1




































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для RXYQ5PY1

Watson-Marlow 120 Installation, Operating And Maintenance Manual preview
120
Бренд: Watson-Marlow Страницы: 55
Raypak 5350 Series Installation And Operating Instructions Manual preview
5350 Series
Бренд: Raypak Страницы: 60
Caframo Pali 9510CA-BBX Operating Instructions preview
Pali 9510CA-BBX
Бренд: Caframo Страницы: 5
NARVI Oy Finland Velvet Installation, User And Maintenance Instructions preview
Velvet
Бренд: NARVI Oy Finland Страницы: 44
Vaillant geoTHERM SERIES Operating Instructions Manual preview
geoTHERM SERIES
Бренд: Vaillant Страницы: 112
Vaillant geoTHERM SERIES Installation Instructions Manual preview
geoTHERM SERIES
Бренд: Vaillant Страницы: 132
QualityCraft MCVT120-150 Quick Start Manual preview
MCVT120-150
Бренд: QualityCraft Страницы: 10
OEG OSP4000 Operation Manual And Spare Parts List preview
OSP4000
Бренд: OEG Страницы: 28
Seville Classics ULTRASlimline 10222 Instruction Manual preview
ULTRASlimline 10222
Бренд: Seville Classics Страницы: 6
Kärcher SCP 16000 IQ Level Sensor Manual preview
SCP 16000 IQ Level Sensor
Бренд: Kärcher Страницы: 76
DAYLIFF DDW 750V Installation & Operating Manual preview
DDW 750V
Бренд: DAYLIFF Страницы: 8
Malmbergs SVQ250F Instruction Manual preview
SVQ250F
Бренд: Malmbergs Страницы: 12
QED WELL WIZARD Installation Manual preview
WELL WIZARD
Бренд: QED Страницы: 33
B-TEC IR-B01-B User Manual preview
IR-B01-B
Бренд: B-TEC Страницы: 11
Xylem LOWARA e-SVE Additional Installation, Operation And Maintenance Instructions preview
LOWARA e-SVE
Бренд: Xylem Страницы: 56
Grundfos JPA 12-41 Installation And Operating Instructions Manual preview
JPA 12-41
Бренд: Grundfos Страницы: 16
Hypro 1542A-SP Series Installation, Operation, Repair And Parts Manual preview
1542A-SP Series
Бренд: Hypro Страницы: 8
Omni OWH-150 Installation, Operation And Service Instructions preview
OWH-150
Бренд: Omni Страницы: 21

Бренды по названию

Популярные бренды

Загрузить еще бренды