Daikin RXYQ5PY1, Руководство по обслуживанию

Страница: 337 / 355

Operation Manual SiEN34-705
330 Operation Manual
2-10 Trouble Shooting
If one of the following malfunctions occur, take the measures
shown below and contact your Daikin dealer.
Warning
Stop operation and shut off the power if anything unusual
occurs (burning smells, etc.)
Leaving the unit running under such circumstances may cause
breakage, electrical shock, or fire.
Contact your dealer.
• If a safety device such as a fuse, a breaker or an earth leakage
breaker frequently actuates;
Measure : Do not turn on the main power switch.
• If the ON/OFF switch does not properly work;
Measure: Turn off the main power switch.
• If water leaks from unit;
Measure: Stop the operation.
• The operation switch does not work well.
Turn off the power.
• If the display “ ”, the unit number and the operation lamp
flash and the malfunction code appears; (Refer to figure 12)
1. Inspection display
2. Indoor unit number in which a malfunction occurs
3. Operation lamp
4. Malfunction code
Measure: Notify your Daikin dealer and report the malfunction
code.
If the system does not properly operate except for the above
mentioned cases and none of the above mentioned malfunc-
tions is evident, investigate the system according to the follow-
ing procedures.
If it is impossible to fix the problem yourself after checking all
the above items, contact your dealer.
Let him know the symptoms, system name, and model name
(listed on the warranty card).
1.
If the system does not operate at all;
• Check if there is no power failure.
Wait until power is restored. If power failure occurs during opera-
tion, the system automatically restarts immediately after the
power supply is recovered.
• Check if no fuse has blown;
Turn off the power supply
• Check if the breaker is blown.
Turn the power on with the
breaker switch in the off position.
Do not turn the power on with
the breaker switch in the trip
position.
(Contact your dealer.)
2.
If the system stops soon after starting the operation;
• Check if air inlet or outlet of outdoor or indoor unit is not blocked by
obstacles.
Remove any obstacle and make it well-ventilated.
• Check if the remote control display shows “ ” (time to clean
the air filter);
Refer to the operation manual of the indoor unit. And clean the air
filter.
3.
The system operates but cooling or heating is insufficient;
• Check if air inlet or outlet of outdoor or indoor unit is not blocked by
obstacles.
Remove any obstacle and make it well-ventilated.
• Check if the remote control display shows “ ” (time to clean
the air filter);
Refer to the operation manual of the indoor unit. And clean the air
filter.
• Check the temperature setting.
Refer to “Operation Procedure”.
• Check the fan speed setting on your remote control.
Refer to “Operation Procedure”.
• Check for open doors or windows.
Shut doors and windows to prevent wind from coming in.
• Check if there are too many occupants in the room during cooling
operation.
• Check if the heat source of the room is excessive during cooling
operation.
• Check if direct sunlight enters the room during cooling operation.
Use curtains or blinds.
• Check if the air flow angle is not proper.
Refer to “Operation Procedure”.
After-sales service and warranty
After-sales service:
Warning
• Do not modify the unit.
This may cause electric shock or fire.
• Do not disassemble or repair the unit.
This may cause electric shock or fire.
Contact your dealer.
• If the refrigerant leaks, keep out of fire.
Although the refrigerant does not usually leak, if the refrigerant
leaks out into a room and comes in contact with the combustible
air in the equipment such as fan heater, stove, oil (gas) cooker,
etc., it will cause toxic gas to be generated.
When a refrigerant leakage failure has been repaired, confirm a
service person that the leakage point has been corrected surely
before restarting operation.
• Do not remove or reinstall the unit by yourself.
Incorrect installation may cause electrical shock or fire.
Contact your dealer.
• When asking your dealer to repair, inform related staff of the
details as follows:
• Product No. of air conditioner:
Refer to the warranty card.
• Shipping date and installation date:
Refer to the warranty card.
• Malfunction:
Inform the staff of the defective details.
(Malfunction code being displayed on the remote control.)
• Name, address, telephone number
• Repair where the warranty term is expired
Contact your dealer. If necessary to repair, pay service is avail-
able.
• Minimum storage period of important parts
Even after a certain type of air conditioner is discontinued, we
have the related important parts in stock for 9 years at least.
The important parts indicate parts essential to operate the air con-
ditioner.
• Recommendations for maintenance and inspection
Since dust collects after using the unit for several years, the per-
formance will be deteriorated to some extent.
Taking apart and cleaning inside require technical expertise, so
we recommend entering a maintenance and inspection contract
(at a cost) separate from normal maintenance.
• Recommended inspection and maintenance cycles
[Note: The maintenance cycle is not the same as the warranty
period.]
Table 1 assumes the following usage conditions.
1.
Normal use without frequent starting and stopping of the machine.
(Although it varies with the model, we recommend not starting and
stopping the machine more than 6 times/hour for normal use.)
2.
Operation of the product is assumed to be 10 hours/day,
2500 hours/year.
TE S T
figure 12
S witch
ON
OFF
Trip po s ition
Bre a ker