Baumuller b maXX BM2500, Руководство по эксплуатации

Страница: 154 / 822

Configuration
Parameter manual b maXX BM3000
Document no.: 5.12001.07 Baumüller Nürnberg GmbH
154
of 820
4.4
Figure 76: ProDrive control structure of the IPMSM
The division of the set values is made along the MTPA characteristic (maximum torque
per ampere). This characteristic now is determined by
Z
171.12
–
only and the ld current
is calculated as follows:
The remaining current from the total current set value is the lq current (
Z
171.16
–
).
4.4.5.2 Commissioning
In order to ensure an optimum in dynamic when operating a IPMSM, the following notes
for setting are mandatory:
– Using a Baumueller motor the data can be loaded from a motor data base. All set-
tings are carried out automatically with ProDrive.
– If no Baumueller motor is used, at first an autotuning (see
Z
Autotuning of Current
controller
–
from page 199) must be executed to set the current controller roughly.
– The notch position must be set next.
– The field current can be limited via parameter limit magnetizing current (
Z
146.12
–
).
This is important in order to prevent the demagnetization of the motor.
I
d
K K
2
I
2
ges
2
---------- + – =