Xerox DocuPrint 180, Message Manual

Page: 75 / 356

IFU (INTERPRESS FONT UTILITY) MESSAGES
XEROX DOCUPRINT 180 LPS MESSAGE GUIDE 5-37
IF8401 FIS font request failed with EMT return code x
The FIS font request cannot be processed due to the EMT (emulator
trap) return code shown.
Action Contact your systems specialist or Xerox Customer Service.
IF8402 FIS initiation failed with EMT return code x
Initiation of FIS cannot be processed due to the EMT return code
shown.
Action Contact your systems specialist or Xerox Customer Service.
IF8403 FIS termination failed with EMT return code x
FIS termination cannot be processed due to the EMT return code
shown.
Action Contact your systems specialist or Xerox Customer Service.
IF8404 Font set is larger than Font_Set_Array_size limit
There is not enough memory to process the font set.
Action Contact your systems specialist or Xerox Customer Service.
IF8405 IPD communication failure; aborting ADD
IPD communication is not operational. The ADD command has been
aborted.
Action Contact your systems specialist or Xerox Customer Service.
IF8406 Incorrect floppy logical unit
The logical unit assigned to the device does not check out correctly.
Action 1. Retry the command.
2. If this fails again, reboot the system and retry the command.
IF8408 Missing block header on medium to read
The text that was just read from the written file on the medium was
not as expected. The format of the file written by the WRITE
command is either corrupted, the READ and WRITE codes are not
being executed synchronically, or a noncopy medium was loaded
when a READ was attempted.
Action 1. Remount the medium (tape, floppy, etc.), making sure it is the
correct medium for a READ
or
2. Execute the corresponding WRITE command again for the
READ that failed.