Xerox DocuPrint 180, Message Manual

Page: 81 / 356

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
XEROX DOCUPRINT 180 LPS MESSAGE GUIDE 6-3
OS0320 Output tray 2 selected
One of the following commands was entered:
-SELECT
-SELECT 2
-SELECT AUTO
-SELECT 2,SAMPLE
Output will be delivered to stacker tray 2.
The printer control console displays:
Output tray 2 selected
Action None.
OS0410 Separate is OFF
The SEPARATE OFF command was entered, cancelling the
previously entered SEPARATE command.
Action None.
OS0411 Stitch is OFF
Confirms a STITCH OFF command.
Action None.
OS0420 Separate is ON
The SEPARATE command was entered. The system will switch
output to a currently inactive stacker tray at the start of the next
report.
Action None.
OS0430 Set command accepted
Confirms a CLUSTER SET command. (This includes CLUSTER
SET/NR, CLUSTER cluster-name SET, or CLUSTER cluster-name
SET/NR commands.)
Action None.
OS0500 Output stopped
The STOP or STOP O command was entered or the <STOP> key
was pressed. Printing has stopped. (Input continues.)
Action To restart:
Enter CONTINUE or CONTINUE O
or
Press the <CON> key.