Xerox DocuPrint 180, Message Manual

Page: 145 / 356

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
XEROX DOCUPRINT 180 LPS MESSAGE GUIDE 6-67
OS2820 Task not allowed till system status = ‘Idle’
The system must be offline and not printing to process the requested
task. The message also appears if the REWIND command is entered
or the Rewind button is pressed while a tape job is printing.
Action 1. Wait until the tape job completes before rewinding the tape.
or
2. Complete or abort any current jobs.
3. Enter the OFFLINE command.
4. Enter the desired command.
OS2822 Do a reset before retrying operation.
Your desired operation cannot be processed until the system has
been reset.
Action 1. Select Reset or enter the RESET command.
2. Retry the applicable operation.
OS2825 Complete Online Jobs. Then vary system offline.
A task was requested for which the system must be offline.
Action 1. Enter the CONTINUE command or press the <CON> key to
process remaining jobs.
or
Complete or abort any current jobs.
2. Enter the RESET command to delete all jobs.
3. Enter the OFFLINE command.
OS2830 Enter ‘HIP END’ before starting another job.
HIP must be prohibited from automatically starting another job while
a job is being processed from another source.
Action Wait until system is idle, then retry.
OS2835 Enter ‘D’ for duplex printing, ‘S’ for simplex printing:
This is one of the series of FEX parameter prompts for the test print
job. Additional prompts include messages OS2922, OS2923,
OS2924, and OS1136.
Action Enter D for two-sided or S for one-sided test print job.
OS2840 Output must be stopped before spacing can be done.
The SPACE n PAGES command was entered during printing. The
command cannot be processed.
Action 1. Enter the STOP O command.
2. Enter the SPACE n PAGES command.