Xerox DocuPrint 180, Message Manual

Page: 305 / 356

XEROX DOCUPRINT 180 LPS ADDITIONAL MESSAGES
XEROX DOCUPRINT 180 LPS MESSAGE GUIDE 15-39
File cannot be accessed . . . .
The file is too large for the PC Editor to process.
Action If the file is an ESS file, use EDI in the message window.
File could not be emptied or deleted. Ensure that the filename is
valid.
An incorrect file name may have been entered, or the file name does
not exist.
Action 1. Check the file listing of the window you are working in for the
correct file name.
2. If the problem persists, contact your systems specialist.
File could not be found. Ensure that the file name is valid.
An incorrect file name may have been entered, or the file name does
not exist.
Action 1. Check the file listing of the window you are working in for the
correct file name.
2. If the problem persists, contact your systems specialist.
3. Call Xerox Customer Service.
Filename has too many characters
A file’s base name can be between one and eight characters long.
Since DOS checks for invalid characters when you enter a base
name, you can use any sequence of characters except the following
invalid ones:
."/<TT>[]<VBAR><>+ :=;,
Action None.
Filename has invalid characters.
A file's base name can be between one and eight characters long.
Since DOS checks for invalid characters when you enter a base
name, you can use any sequence of characters except the following
invalid ones:
."/<TT>[]<VBAR><>+ :=;,
Action Check characters and reenter filename.
Filename has invalid extension.
An extension is limited to three characters. An extension cannot
contain invalid characters. You can use any sequence of characters
except the following:
."/<TT>[]<VBAR><>+ :=;,
Action Reenter the filename using valid extension