Xerox DocuPrint 180, Message Manual

Page: 93 / 356

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
XEROX DOCUPRINT 180 LPS MESSAGE GUIDE 6-15
OS1101 FCG working.
FCG tasks are in progress.
Action None.
OS1102 Finishing Exerciser is reconnecting to the IOT.
After completing the test print job, FEX is reconnecting
communications with the printer and restoring the previous finishing
parameters information.
Action None.
OS1103 FEX: Error, problem while restoring IOT Memory.
A serious error has occurred when FEX attempted to communicate
with the printer.
Action Restart FEX.
OS1104 Failed to connect to the IOT. Exiting.
FEX could not establish communications with the printer, because a
job is printing.
Action Restart FEX when the Xerox DocuPrint 180 LPS is not actively
printing a job.
OS1105 No valid machine serial number received. Task exiting
The printer serial number was not found when the system attempted
to produce a billing report.
Action If authorized to do so, resysgen the system, entering the serial
number (located on a panel inside the printer) when instructions on
the display ask for it. (Refer to
Xerox DocuPrint 180 LPS System
Generation Guide
, or contact your systems specialist.)
OS1106 Lowercase characters not valid in machine serial number
Lowercase characters are not valid in the machine serial number.
Action 1. Verify the tray(s) or bin(s) in your command.
or
Select a different tray or bin.
2. Retry the command.
OS1131 FEX: Problem communicating with the IOT. Exiting.
FEX has detected a problem communicating with the printer.
Action Restart FEX.