Xerox DocuPrint 180, Message Manual

Page: 235 / 356

SFS (STATUS FILE SERVICES COMMAND) MESSAGES
XEROX DOCUPRINT 180 LPS MESSAGE GUIDE 12-3
SF4500 Cannot write on tape. Check tape and try again.
The write enable ring is missing from magnetic tape, magnetic tape
is not loaded correctly, or the magnetic tape drive is not online to the
printer.
Action Place a write enable ring on the magnetic tape reel.
or
Press the On Line button on the magnetic tape drive.
or
Reload the magnetic tape correctly. (Refer to the offline chapter in
your
Xerox DocuPrint 180 LPS Operator Guide
.)
SF6010 Statement ignored.
During the compiling of a user-created form, the system has
encountered a command in which incorrect syntax was used. The
command is being ignored.
Action Recompile the form, restating the command correctly. (Refer to your
Xerox DocuPrint 180 LPS Operations Reference chapter on setting
LPS parameters for additional information.)
SF6020 Column ignored.
A WIDTH or CONTENT statement in a user-created form is
incorrectly formatted or missing. The column will not be created.
Action Recompile the form, entering WIDTH and CONTENT statements
correctly.
SF6030 ...Column x
An error exists in the indicated column. (The message is followed by
other message(s) explaining the nature of the problem.)
Action None.
SF6035 ...Statement(s) ignored: xx
A user-created Status File form has been compiled. The form
contains the indicated number of incorrectly constructed statements.
Action If desired, recompile the form, correctly entering statements that
were ignored.
SF6040. ..Valid columns: x
A user-created form has been compiled, containing the indicated
number of columns.
Action None.